About this task
The following image indicates the location of the power-adapter port and provides a visual representation of the installation procedure.
Steps
1
Place the power-adapter port into the slot and adhere the power-adapter port cable on the palm rest and keyboard assembly.
2
Connect the power-adapter port cable to the system board.
3
Align and place the power-adapter port bracket over the power-adapter port.
4
Replace the two screws (M2x3) to secure the power-adapter port bracket to the system board.
Next step
1
Install the
.
2
Install the
.
3
Follow the procedure in
After working inside your computer
Identifier
GUID-A4EB1B18-E790-4DC7-A6B0-85015144D8CE
Status
Released
I/O board
Identifier
GUID-59DA147E-C1D2-4060-8A28-765A287FF639
Status
Released
Removing the I/O board
Prerequisites
1
Follow the procedure in
Before working inside your computer
2
Remove the
.
40
Removing and installing components
Summary of Contents for G3 3590
