Dell G3 15 3500 Service Manual Download | Manualshive

Page: 69 / 75

background image

Steps

1. Remove the

.

2. Remove the

coin-cell battery

.

3. Wait for one minute.
4. Replace the

coin-cell battery

.

5. Replace the

.

Clearing BIOS (System Setup) and System passwords

About this task

To clear the system or BIOS passwords, contact Dell technical support as described at

www.dell.com/contactdell

.

NOTE:

For information on how to reset Windows or application passwords, refer to the documentation accompanying

Windows or your application.

Updating the BIOS

Updating the BIOS in Windows

Steps

1. Go to

www.dell.com/support

.

2. Click

Product support

. In the

Search support

box, enter the Service Tag of your computer, and then click

Search

.

NOTE:

If you do not have the Service Tag, use the SupportAssist feature to automatically identify your computer. You

can also use the product ID or manually browse for your computer model.

3. Click

Drivers & Downloads

. Expand

Find drivers

.

4. Select the operating system installed on your computer.
5. In the

Category

drop-down list, select

BIOS

.

6. Select the latest version of BIOS, and click

Download

to download the BIOS file for your computer.

7. After the download is complete, browse the folder where you saved the BIOS update file.
8. Double-click the BIOS update file icon and follow the on-screen instructions.

For more information, see knowledge base article

at

www.dell.com/support

.

Updating the BIOS using the USB drive in Windows

Steps

1. Follow the procedure from step 1 to step 6 in

Updating the BIOS in Windows

to download the latest BIOS setup program file.

2. Create a bootable USB drive. For more information, see the knowledge base article

at

www.dell.com/support

.

3. Copy the BIOS setup program file to the bootable USB drive.
4. Connect the bootable USB drive to the computer that needs the BIOS update.
5. Restart the computer and press

F12

.

6. Select the USB drive from the

One Time Boot Menu

.

7. Type the BIOS setup program filename and press

Enter

.

The

BIOS Update Utility

appears.

8. Follow the on-screen instructions to complete the BIOS update.

System setup

69

«
...
67
68
69
70
71
...
»

Summary of Contents for G3 15 3500












































































Reviews:

No comments

Related manuals for G3 15 3500

Brand: IBM Pages: 2

Brand: IBM Pages: 189

Brand: IBM Pages: 147

Brand: NEC Pages: 106

Brand: NEC Pages: 10

Brand: NEC Pages: 8

Brand: NEC Pages: 2

Brand: NEC Pages: 4

Brand: Rugged Computing Pages: 43

Joybook R41 series

Brand: BenQ Pages: 42

Visionbook 13WA PLUS

Brand: UMAX Technologies Pages: 34

TravelMate 8571

Brand: Acer Pages: 98

TravelMate 7510

Brand: Acer Pages: 94

TravelMate 6592G Series

Brand: Acer Pages: 148

TravelMate 2300 Series

Brand: Acer Pages: 95

TravelMate 5740 Series

Brand: Acer Pages: 314

Brand: Acer Pages: 73

Brand: Acer Pages: 156

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands