Dell G15 5510, Service Manual

Page: 54 / 75

Installing the power button
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the power button and provides a visual representation of the installation
procedure.
Steps
1. Place the power button on the slot on the palm-rest and keyboard assembly.
2. Replace the two screws (M2x2) that secure the power button to the palm-rest and keyboard assembly.
3. Align the screw holes on the power-button shield with the screw holes on the palm-rest and keyboard assembly.
4. Replace the two screws (M2x2) that secure the power-button shield to the palm-rest and keyboard assembly.
Next steps
1. Install the system board .
2. Install the left fan .
3. Install the right fan .
4. Install the memory module .
5. Install the wireless card .
6. Install the solid-state drive 2 .
7. Install the solid-state drive 1 .
8. Install the rear cover
9. Install the battery .
10. Install the base cover .
11. Follow the procedure in After working inside your computer .
54 Removing and installing components