Dell Force10 TeraScale C Series, Reference Manual

Page: 1318 / 1640

1318 | Security
www.dell.com | support.dell.com
Usage
Information
If you want to log in without being prompted for a password, log in through RSA authentication. To do
that, you must first add the SSHv2 RSA public keys to the list of authorized keys. This command adds
the specified RSA keys to the following file:
flash://ADMIN_DIR/ssh/authorized-keys -
username
(where
username
is the user associated with
this terminal).
Related
Commands
ip ssh server
c e s
Configure an SSH server.
Syntax ip ssh server {enable | port port-number
} [
version { 1 | 2 }]
To disable SSH server functions, enter
no ip ssh server enable
command.
Parameters
Defaults Default listening port is 22
Command Modes CONFIGURATION
Command
History
Usage
Information
This command enables the SSH server and begins listening on a port. If a port is not specified, listening
is on SSH default port 22.
Example Figure 51-9. ip ssh server port Command Example
Related
Commands
Note:
The no form of this command deletes the file flash://ADMIN_DIR/ssh/
authorized-keys- username
show ip ssh rsa-authentication Display RSA authorized keys.
ip ssh rsa-authentication (Config) Enable RSA authentication.
enable
Enter the key word
enable
to start the SSH server.
port port-number
(OPTIONAL) Enter the keyword
port
followed by the port number of the
listening port of the SSH server.
Range: 1 to 65535
Default: 22
[ version
{
1
|
2
}]
(OPTIONAL) Enter the keyword
version
followed by the SSH version 1
or 2 to specify only SSHv1 or SSHv2.
Version 7.6.1.0 Introduced for S-Series
Version 7.5.1.0 Expanded to include specifying SSHv1 or SSHv2; Introduced for C-Series
pre-Version 6.1.1.0 Introduced for E-Series
FTOS# conf
FTOS(conf)# ip ssh server port 45
FTOS(conf)# ip ssh server enable
FTOS#
show ip ssh Display the ssh information