Dell Force10 TeraScale C Series, Reference Manual

Page: 1209 / 1640

Quality of Service (QoS) | 1209
Example Figure 47-3. show cam layer2-qos interface Command Output
Example Figure 47-4. show cam layer2-qos linecard Command Output
show cam layer3-qos
e
Display the Layer 3 QoS CAM entries.
Syntax show cam layer3-qos
{[
linecard number port-set number
] | [
interface interface
]}
[
summary
]
Parameters
Defaults No default behavior or values
Command Modes EXEC
FTOS#show cam layer2-qos interface gigabitethernet 2/0
Cam Port Dot1p Proto SrcMac
SrcMask DstMac DstMask Dot1p DSCP Queue
Index Marking Marking
-------------------------------------------------------------------------------------------------------------------------
-------
01817 0 - 0
00:00:00:00:cc:cc 00:00:00:00:ff:ff 00:00:00:00:dd:dd 00:00:00:00:ff:ff - - 7
01818 0 - 0 00:00:00:00:00:c0 00:00:00:00:00:f0 00:00:00:00:00:d0 00:00:00:00:00:f0 - 45 5
01819 0 4 0 00:00:00:a0:00:00 00:00:00:ff:00:00 00:00:00:b0:00:00 00:00:00:ff:00:00 4 - 4
01820 0 - 0x2000 00:00:00:00:00:00 00:00:00:00:00:00 00:00:00:00:00:b0 ff:ff:ff:ff:ff:ff - - 1
02047 0 - 0 00:00:00:00:00:00 00:00:00:00:00:00 00:00:00:00:00:00 00:00:00:00:00:00 - - 0
FTOS#
FTOS#show cam layer2-qos linecard 2 port-set 0
Cam Port Dot1p Proto SrcMac
SrcMask DstMac DstMask Dot1p DSCP Queue
Index Marking Marking
----------------------------------------------------------------------------------------------------------------------=--
01817 0 - 0
00:00:00:00:cc:cc 00:00:00:00:ff:ff 00:00:00:00:dd:dd 00:00:00:00:ff:ff - - 7
01818 0 - 0 00:00:00:00:00:c0 00:00:00:00:00:f0 00:00:00:00:00:d0 00:00:00:00:00:f0 - 45 5
01819 0 4 0 00:00:00:a0:00:00 00:00:00:ff:00:00 00:00:00:b0:00:00 00:00:00:ff:00:00 4 - 4
01820 0 - 0x2000 00:00:00:00:00:00 00:00:00:00:00:00 00:00:00:00:00:b0 ff:ff:ff:ff:ff:ff - - 1
02047 0 - 0 00:00:00:00:00:00 00:00:00:00:00:00 00:00:00:00:00:00 00:00:00:00:00:00 - - 0
FTOS#
linecard number
Enter the keyword
linecard
followed by the line card slot number.
E-Series Range: 0 to 13 on a E1200, 0 to 6 on a E600/E600i, and 0 to 5 on a
E300.
port-set number
Enter the keyword
port-set
followed by the line card’s port pipe.
Range: 0 or 1
interface interface
Enter the keyword
interface
followed by one of the keywords below and
slot/port or number information:
• For a Fast Ethernet interface, enter the keyword
FastEthernet
followed by the slot/port information.
• For a Gigabit Ethernet interface, enter the keyword
GigabitEthernet
followed by the slot/port information.
• For a SONET interface, enter the keyword
sonet
followed by the slot/
port information.
• For a Ten Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
followed by the slot/port information.
summary
(OPTIONAL) Enter the keyword
summary
to display only the total
number of CAM entries.