flow-map
Specify if flows installed by the controller should be interpreted by the switch for placement in L2 or L3 tables.
Z-Series, S4810
Syntax
flow-map {l2|l3} enable
Parameter
l2
Enter l2 to interpret Layer 2 flows.
l3
Enter l3 to interpret Layer 3 flows.
Defaults
None (not enabled)
Command Modes
OPENFLOW INSTANCE
Command History
Version 9.1(0.0)
Introduced on Z9000 and S4810.
Usage
Information
L2 flow-mapping is not supported on OpenFlow instances with an interface-type of “port.”
Related
Commands
openflow of-instance
Create or modify an OpenFlow instance.
interface-type
Specify the type of interface (port, VLAN, or any) for the OpenFlow instance.
Z-Series, S4810
Syntax
interface-type {any|port|vlan}
Defaults
port
Parameter
any
Enter the keyword
any
to enable configuration of physical interfaces,
LAGs, and VLANs on the selected OF instance.
port
Default. Enter the keyword
port
to enable configuration of LAGs or
physical interfaces on the selected OF instance.
vlan
Enter the keyword
vlan
to enable configuration of VLANs on the
selected OF instance.
NOTE: You must associate the OF instance with the VLAN when
the VLAN is created.
Command Modes
OPENFLOW INSTANCE
Command History
Version 9.1(0.0)
Introduced on Z9000 and S4810.
30
