Figure 49. Installing the M.2 riser
NOTE:
XC Core does not use the SATA cable version.
Next steps
1.
2. Follow the procedure listed in
After working inside your system
.
Removing the M.2 SSD module
Prerequisites
1. Follow the safety guidelines listed in
.
2. Follow the procedure listed in
Before working inside your system
3.
Steps
1. Using a Phillips #1 screwdriver, remove the screw securing the M.2 SSD module to the M.2 riser.
2. Pull the M.2 SSD module to disconnect from the connector on the M.2 riser.
Installing and removing system components
49
