Figure 47. Installing the LOM
Next steps
1.
Install the expansion card riser 1
.
2. Follow the procedure listed in
After working inside your system
.
M.2 SSD module
Removing the M.2 riser
Prerequisites
●
Follow the safety guidelines listed in
.
●
Follow the procedure listed in
Before working inside your system
●
.
Steps
1. Using a Phillips #2 screwdriver, remove the screw that secures the riser to the chassis.
2. Holding the blue tag, lift the riser to disengage the riser from the connector on the system board.
Installing and removing system components
47
