Table 26. USB specifications
appliance
Front panel
Back panel
Internal
Ten hard drive appliances
Two 4-pin, USB 2.0-compliant
port
Two 9-pin, USB 3.0-compliant
ports
One 9-pin, USB 3.0-compliant
ports
One 5-pin micro USB 2.0
management port
N/A
N/A
NOTE:
The micro USB 2.0-compliant port on the front panel can only be used as an iDRAC Direct or a management port.
NIC ports
The VxRail E560, E560F, and E560N appliance supports four Network Interface Controller (NIC) ports on the back panel, which
is available in one of the following NIC configurations:
●
Four RJ-45 ports that support 100 M, 1 G and 10 Gbps
●
Four SFP+ ports that support 10 Gbps
Serial port
The serial connector connects a serial device to the appliance. The VxRail E560, E560F, and E560N appliance supports one
serial connector on the back panel, which is a 9-pin connector, Data Terminal Equipment (DTE), 16550-compliant.
VGA ports
The Video Graphic Array (VGA) port enables you to connect the appliance to a VGA display. The VxRail E560, E560F, and
E560N appliance supports one 15-pin VGA port on the front and back of appliance.
Video specifications
The VxRail E560, E560F, and E560N appliance supports integrated VGA controller with 4 MB SPI capacity.
Table 27. Supported video resolution options
Resolution
Refresh rate (Hz)
Color depth (bits)
640 x 480
60, 70
8, 16, 32
800 x 600
60, 75, 85
8, 16, 32
1024 x 768
60, 75, 85
8, 16, 32
1152 x 864
60, 75, 85
8, 16, 32
1280 x 1024
60, 75
8, 16, 32
1440 x 900
60
8, 16, 32
1920 x 1200
60
8, 16, 32
Internal dual SD Module
The Internal Dual SD module (IDSDM) provides a redundant SD card solution. The IDSDM card offers the following feature:
●
Dual card operation — Maintains a mirrored configuration by using SD cards in both the slots and provides redundancy.
NOTE:
The IDSDM on the VxRail appliance is pre-configured for appliance bare metal recovery. It is recommended not to
change any settings.
24
Technical specifications
