Table 17 Single-phase power distribution cabling (continued)
Source
Destination
Node 2 PSU2
PDU 4 Port 13
Node 1 PSU1
PDU 3 Port 14
Node 1 PSU2
PDU 4 Port 14
Management network wiring for 2U1N configuration
Use the following figure and table to connect the management network cables.
Note
The page does not provide enough space to illustrate cabling of the maximum number
of nodes in the management network. However, the table does provide all the source
to destination cabling for the maximum sized network.
Figure 37 Management network
iDRA
C
iDRA
C
Node 16
Node 1
Mgmt Switch A
To core switch or
Mgmt Switch B
Mgmt Server
Data Switch A
Data Switch B
<…>
MGMT
38
45
46
47
48
NIC1
2
4
NIC1
BMC/
iDRAC
Wiring Diagrams for a 2U1N Configuration
80
Hardware Installation Guide
Summary of Contents for EMC VxFlex Ready Node 14G
