Removing the front bezel
Prerequisite
Follow the safety guidelines listed in
Steps
1
Unlock the bezel.
2
Press the blue release latch at the top of the bezel to release the bezel from the system.
3
Pull the top end of the bezel away from the system.
4
Unhook the bezel tabs from the slots at the bottom of the system, and lift the bezel away.
Figure 21. Removing the front bezel
Next step
1
.
Installing the front bezel
Prerequisite
Follow the safety guidelines listed in
Steps
1
Locate and remove the bezel key.
NOTE:
There are two bezel keys attached to the back of the bezel.
2
Insert the bezel tabs into the slots in the chassis.
3
Press the release latch, and push the bezel toward the system until the bezel locks into place.
4
Using the key lock the bezel.
Installing and removing system components
65
Summary of Contents for EMC PowerEdge T640 D24XR
Page 23: ...Figure 16 Configuration and layout Dell EMC PowerEdge T640 overview 23 ...
Page 24: ...Figure 17 Electrical overview 24 Dell EMC PowerEdge T640 overview ...
Page 25: ...Figure 18 Memory information Dell EMC PowerEdge T640 overview 25 ...
