Figure 83. Removing the optional IDSDM/vFlash module
NOTE:
There are two dip switches on the IDSDM/vFlash module for write-protection.
Next step
1
Install the optional IDSDM/vFlash card.
Installing optional IDSDM or vFlash module
Prerequisite
Follow the safety guidelines listed in
Steps
1
Locate the IDSDM/vFlash connector on the system board.
To locate IDSDM/vFlash connector, see the
System board jumpers and connectors
section.
2
Align the IDSDM/vFlash card with the connector on the system board.
3
Push the IDSDM/vFlash module until it is firmly seated on the system board.
Installing and removing system components
135
Summary of Contents for EMC PowerEdge T640 D24XR
Page 23: ...Figure 16 Configuration and layout Dell EMC PowerEdge T640 overview 23 ...
Page 24: ...Figure 17 Electrical overview 24 Dell EMC PowerEdge T640 overview ...
Page 25: ...Figure 18 Memory information Dell EMC PowerEdge T640 overview 25 ...