Figure 22. Removing the optical drive filler from the front bezel
2. On the optical drive cage, hold the tabs on the optical drive filler and remove the filler from the optical drive cage.
Figure 23. Removing the optical drive filler from the optical drive cage
Next steps
Replace the optical drive filler
.
Installing the optical drive fillers
Prerequisites
1. Follow the safety guidelines listed in
.
2. Follow the procedure that is listed in
Before working inside your system
.
3.
.
NOTE:
There are two optical drive fillers, plastic filler on the front bezel, and metal filler on the optical drive cage.
Steps
1. On the front bezel, insert the tabs on optical drive blank into the slots and push the blank until it locks in place.
36
Installing and removing system components
