Figure 101. Installing the rear drive cage
Next steps
1
Reconnect all the disconnected cables to the rear drive backplane.
2
Install all the drives.
3
Follow the procedure listed in
After working inside your system
.
Related link
System battery
The system battery is used for low-level system functions such as powering the real-time and date settings of the system.
Replacing the system battery
Prerequisites
WARNING:
There is a danger of a new battery exploding if it is incorrectly installed. Replace the battery only with the same or
equivalent type recommended by the manufacturer. For more information, see the safety information that shipped with your
system.
1
Follow the safety guidelines listed in
2
Follow the procedure listed in
Before working inside your system
.
3
If applicable, disconnect the power or data cables from expansion card(s).
4
If installed, remove the low profile or full height X1 expansion card risers.
144
Installing and removing system components
