84
Dell EMC Connectrix EC-1700 Cabinet Installation and Setup Manual
Installing Directors into the EC-1700 Cabinet
shows two MDS 9710 directors installed in the EC-1700
cabinet.
Figure 61
EC-1700 cabinet with two MDS 9710 directors installed
Connecting MDS 9710 or MDS 9706 power
The EC-1700-C contains no PDUs. Power for the MDS 9710or 9706 is
provided by connecting the MDS power cords directly to the
customer's facility power.
Order the same power cords you would normally order for
connecting the MDS 9710 or 9706 directors to the customer's facility
power for the country of destination.
◆
Each MDS 9710 requires max of 8 power cords, depending on
configuration, for a fully loaded chassis with full power
redundancy.
