Disabling CallHome or ConnectHome and Email notifications
Open a HyperTerminal session with the Celerra system and then use procedure in the section
that follows for your EMCNAS version to disable CallHome or ConnectHome and Email
notification.
Opening a HyperTerminal session with the system
1. At the rear of the cabinet, connect the null modem cable (P/N 038-003-458) from the serial
port on the service laptop to the primary Control Station (
).
Serial port
Figure 1. Control station serial connection
2. Open the HyperTerminal session using the following settings:
19200
Bits per second:
8
Data bits:
None
Parity:
1
Stop bits:
None
Flow control:
Auto Detect
Emulation:
ANSI
Telnet terminal ID:
Note:
If you cannot connect to the HyperTerminal session, reboot the Control Station, log in, and
repeat this step.
3. Login as
nasadmin
:
login
:
nasadmin
4. Become the root user:
$ su root
Password:
Disabling CallHome or ConnectHome and Email notifications
5
Disabling CallHome or ConnectHome and Email notifications
