Dell Embedded Box PC 5000, Service Manual

Page: 94 / 115

Replacing the riser card
WARNING: Before working inside your Embedded Box PC, read the
safety information that shipped with your Embedded Box PC and
follow the steps in
Before working inside your Embedded Box PC .
After working inside your Embedded Box PC, follow the steps in After
working inside your Embedded Box PC . For more safety best practices,
see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance .
Procedure
1 Align the screw holes on the bracket with the screw holes on the riser
card.
2 Replace the screws that secure the bracket with the riser card.
3 Insert the riser-card assembly in the riser-card slot.
4 Replace the screws that secure the riser-card assembly to the chassis.
Post-requisites
1 Replace the PCI/PCIe card (if necessary).
2 Follow step 2 to step 9 in “ Replacing the back cover ”.
94