Dell Embedded Box PC 5000, Service Manual

Page: 34 / 115

Replacing the interposer board
WARNING: Before working inside your Embedded Box PC, read the
safety information that shipped with your Embedded Box PC and
follow the steps in
Before working inside your Embedded Box PC .
After working inside your Embedded Box PC, follow the steps in After
working inside your Embedded Box PC . For more safety best practices,
see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance .
Procedure
1 Align the screw holes on the interposer board with the screw holes on
the solid-state drive card bracket.
2 Replace the screws that secure the interposer board to the solid-state
drive card bracket.
Post-requisites
1 Replace the solid-state drive in to bracket .
2 Replace the drives in to the hard-drive cage .
3 Follow step 2 to step 8 in “ Replacing the back cover ”.
34