Dell EGW-3200 User Manual Download Page 59

Page: 59 / 88

Setting Up the Ubuntu Operating System

This chapter serves as a guide to install and use the Ubuntu 20.04 LTS operating system on the EGW-3200 hardware.

For more information on the Ubuntu 20.04 LTS operating system, see

https://releases.ubuntu.com/20.04/

Topics:

•

Boot up and log in

•

Create bootable USB stick for factory reset

•

Back up and restore Ubuntu 20.04 LTS

•

Update BIOS capsule

•

Update LiteBMC firmware

•

Update 4G module firmware

•

Update 5G module firmware

•

Ubuntu 20.04 LTS basic functions

•

Isolated Canbus uFM expansion module

•

EMP2-X2S1 card with isolated RS-232 uFM expansion module

•

EMP2-X4S2 card with isolated RS-422/485 uFM expansion module

Boot up and log in

Steps

1. Connect a keyboard, mouse, and monitor to the EGW-3200.
2. Power on the system. The system boots to the Ubuntu 20.04 LTS operating system.
3. Log in to the sysem. At initial login, the user must change the password of the default account.

NOTE:

The default username/password is ubuntu/ubuntu.

Create bootable USB stick for factory reset

About this task

Perform this task for recovery of the system.

Steps

1. Install the image. Download the Ubuntu desktop image 21.10 or a newer version from the Canonical website:

https://ubuntu.com/download/desktop

2. To create a bootable USB stick on Ubuntu, perform the steps in the following tutorial:

https://ubuntu.com/tutorials/create-a-usb-stick-on-ubuntu#1-overview

To create a bootable USB stick on Windows, perform the steps in the following tutorial:

https://ubuntu.com/tutorials/create-a-usb-stick-on-windows#1-overview

Setting Up the Ubuntu Operating System

Summary of Contents for EGW-3200

























































































Search results

Summary of Contents for EGW-3200

Reviews:

Related manuals for EGW-3200

Brands by name

Popular brands

Dell EGW-3200, User Manual

Search results

Summary of Contents for EGW-3200

Reviews:

Related manuals for EGW-3200

Brands by name

Popular brands