PowerEdge R6515 system overview
The PowerEdge R6515 system is a 1U server that supports:
●
One AMD EPYC 7002 series processor
●
16 DIMM slots
●
Two redundant AC power supply units
●
Up to 4 x 3.5-inch, 8 x 2.5-inch SAS/SATA drives, 10 x 2.5-inch drives (with 8 SAS/SATA/ NVMe 2 NVMe drives)
or 10x 2.5-inch NVMe drives only.
NOTE:
For more information about how to hot swap NVMe PCIe SSD U.2 device, see the
Dell Express Flash NVMe PCIe
SSD User's Guide
> Browse all Products
>
Data Center Infrastructure
>
Storage
Adapters & Controllers
>
Dell PowerEdge Express Flash NVMe PCIe SSD
>
Documentation
>
Manuals and
Documents
.
NOTE:
All instances of SAS, SATA drives are referred to as drives in this document, unless specified otherwise.
For more information, see the Dell EMC PowerEdge R6515 Technical Specifications on the product documentation page.
Topics:
•
•
•
•
Locating the Express Service Code and Service Tag
•
•
Rail sizing and rack compatibility matrix
Front view of the system
Figure 1. Front view of 4 x 3.5-inch drive system
Table 1. Features available on the front of the system
Item
Ports, panels, and
slots
Icon
Description
1
Left control panel
N/A
Contains the system health, system ID, status LED, and the
iDRAC Quick Sync 2 (wireless) indicator.
NOTE:
The iDRAC Quick Sync 2 indicator is available only
on certain configurations.
●
Status LED: Enables you to identify any failed hardware
components. There are up to five status LEDs and an overall
system health LED (Chassis health and system ID) bar. For
more information, see the Status LED indicators section.
2
8
PowerEdge R6515 system overview
