Table 11. Back view of the system with full height riser (continued)
Item
Ports, panels, or slots
Icon
Description
10
System status indicator
cable port
N/A
Enables you to connect the status indicator cable and view system
status when the CMA is installed.
11
System identification
button
Press the system ID button:
●
To locate a particular system within a rack.
●
To turn the system ID on or off.
To reset iDRAC, press and hold the button for more than 15
seconds.
NOTE:
●
To reset iDRAC using system ID, ensure that the system ID
button is enabled in the iDRAC setup.
●
If the system stops responding during POST, press and hold
the system ID button (for more than five seconds) to enter
the BIOS progress mode.
Figure 10. Back view of the system with 2 risers
Table 12. Back view of the system with 2 risers
Item
Ports, panels, or slots
Icon
Description
1
Serial port
Use the serial port to connect a serial device to the system. For
more information, see the PowerEdge R440 Technical Specs at
www.dell.com/poweredgemanuals
.
2
iDRAC9 dedicated
network port
NA
Use the iDRAC9 dedicated network port to securely access the
embedded iDRAC on a separate management network, see the
Integrated Dell Remote Access Controller User's Guide
at
3
Ethernet ports (2)
Use the Ethernet ports to connect Local Area Networks (LANs) to
the system. For more information, see the PowerEdge R440
Technical Specs at
4
Low profile riser right slot N/A
Use the card slot to connect half-height PCIe expansion card on
low profile riser.
5
Low profile riser left slot
N/A
Use the card slot to connect half-height PCIe expansion card on
low profile riser.
6
Cabled PSU
N/A
FFor more information, see the PowerEdge R440 Technical Specs
at
7
LOM riser ports (2)
For more information, see the PowerEdge R440 Technical Specs at
8
USB 3.0 port (2)
Use the USB 3.0 port to connect USB devices to the system.
These ports are 4-pin, USB 3.0-compliant.
9
VGA port
Use the VGA port to connect a display to the system. For more
information, see the PowerEdge R440 Technical Specs at
16
Dell EMC PowerEdge R440 system overview
