Dell E193FPc Service Manual Download Page 6

Page: 6 / 78

Dell E193FPc

3. Operation instructions

3.1 General Instructions

Press the power button to turn the monitor on or off. The other control buttons are located at front panel of the

monitor. By changing these settings, the picture can be adjusted to your personal preferences.

The power cord should be connected.

Connect the video cable from the monitor to the video card.

Press the power button to turn on the monitor, the power indicator will light up.

3.2 Control Buttons

Power Button:

When pressed, the monitor enters the off mode, and the LED turns blank. Press again to

restore normal status.

Brightness Button:

The Brightness Button is used to select the Brightness/Contrast adjust functions.

Press to switch functions or adjust settings.

Auto Adjust Key:

The Auto Adjust Key is used to automatically set the H Position, V Position,

Clock and Phase.

Power Indicator:

Green — Power On mode.

Orange — Power Saving mode.

Blank — Power Off Mode.

A. Buttons for the OSD menu (On-Screen-display)

B. Brightness Button

C. Auto Adjust Button

D. Power On/Off Button and indicator

Control Button

Summary of Contents for E193FPc















































































Search results

Summary of Contents for E193FPc

Reviews:

Related manuals for E193FPc

Brands by name

Popular brands

Dell E193FPc, Service Manual

Search results

Summary of Contents for E193FPc

Reviews:

Related manuals for E193FPc

Brands by name

Popular brands