Figure 36. Installing the expansion card riser
1. expansion card riser
2. touch points on the riser
3. slot on the chassis
4. riser connector on the system board
Next steps
Follow the procedure listed in the After working inside your system section.
Related tasks
Removing an expansion card
Installing an expansion card
After working inside your system
Removing the expansion card riser
Related reference
Removing an expansion card
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow
the safety instructions that are shipped with your product.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
Steps
1. Disconnect any cables connected to the expansion card or expansion card riser.
2. If installed, remove the expansion card riser.
80
Installing and removing system components
