Dell DSS 1510 Owner'S Manual Download

Page: 38 / 137

Related tasks

Viewing System Information

Related reference

System Information
System Information details

Memory Settings

You can use the

Memory Settings

screen to view all the memory settings and enable or disable specific memory functions, such as

system memory testing and node interleaving.

Related tasks

Viewing Memory Settings

Related reference

Memory Settings details
System BIOS

Viewing Memory Settings

To view the

Memory Settings

screen, perform the following steps:

Steps

1. Turn on, or restart your system.
2. Press F2 immediately after you see the following message:

F2 = System Setup

NOTE:

If your operating system begins to load before you press F2, wait for the system to finish booting, and then

restart your system and try again.

3. On the

System Setup Main Menu

screen, click

System BIOS

4. On the

System BIOS

screen, click

Memory Settings

Related reference

Memory Settings
Memory Settings details

Memory Settings details

About this task

The

Memory Settings

screen details are explained as follows:

Option

Description

System Memory
Size

Specifies the memory size in the system.

System Memory
Type

Specifies the type of memory installed in the system.

System Memory
Speed

Specifies the system memory speed.

System Memory
Voltage

Specifies the system memory voltage.

Video Memory

Specifies the amount of video memory.

Pre-operating system management applications

Summary of Contents for DSS 1510










































































































































Search results

Summary of Contents for DSS 1510

Reviews:

Related manuals for DSS 1510

Brands by name

Popular brands

Dell DSS 1510, Owner'S Manual

Search results

Summary of Contents for DSS 1510

Reviews:

Related manuals for DSS 1510

Brands by name

Popular brands