background image

Related tasks

Viewing Boot Settings

Related reference

Boot Settings
Boot Settings details

Network Settings

You can use the 

Network Settings

 screen to modify PXE device settings. The network settings option is available only in the UEFI mode.

NOTE: 

The BIOS does not control network settings in the BIOS mode. For the BIOS boot mode, the optional Boot ROM 

of the network controllers handles the network settings.

Related concepts

UEFI iSCSI Settings

Related tasks

Viewing Network Settings
Viewing UEFI iSCSI Settings

Related reference

Network Settings screen details
UEFI iSCSI Settings details
System BIOS

Viewing Network Settings

To view the 

Network Settings

 screen, perform the following steps:

Steps

1. Turn on, or restart your system.
2. Press F2 immediately after you see the following message:

F2 = System Setup

NOTE: 

If your operating system begins to load before you press F2, wait for the system to finish booting, and then 

restart your system and try again.

3. On the 

System Setup Main Menu

 screen, click 

System BIOS

.

4. On the 

System BIOS

 screen, click 

Network Settings

.

Related reference

Network Settings
Network Settings screen details

Network Settings screen details

The 

Network Settings

 screen details are explained as follows:

About this task

Option

Description

PXE Device n (n = 
1 to 4)

Enables or disables the device. When enabled, a UEFI boot option is created for the device.

Pre-operating system management applications

31

Summary of Contents for DSS 1510










































































































































Reviews: