Figure 64. Removing the control panel—eight 2.5-inch hard drive chassis
a. control panel
b. notches (6)
Next steps
1. Replace the control panel.
2. Follow the procedure listed in the After working inside your system section.
Related tasks
Before working inside your system
Installing the control panel
Related reference
Installing the control panel
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow
the safety instructions that are shipped with your product.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Keep the Phillips #2 screwdriver handy.
Steps
Align the locking tabs on the control panel with the notches on the chassis and angle the control panel until it snaps into place.
When properly seated, the control panel is flush with the front panel.
Installing and removing system components
109
