manualshive.com logo in svg

Dell d400 - Latitude - Pentium M 1.3 GHz, Service Manual, Page: 27 / 78

Share
Download
Dell d400 - Latitude - Pentium M 1.3 GHz Service Manual Download Page 27

Mini PCI Card: 

Back to Contents Page

 

Mini PCI Card 

 

CAUTION: 

Before performing the following procedures, read the safety instructions 

in your 

System Information Guide

.

NOTICE: 

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or 

by periodically touching an unpainted metal surface (such as the back panel) on the computer. 

1.  Follow the instructions in "

Preparing to Work Inside the Computer

" to remove the battery and 

prepare the computer for work. 

2.  

Remove the keyboard

. 

3.  If a Mini PCI card is not already installed, go to 

step 4

. If you are replacing a Mini PCI card, 

remove the existing card: 

a.  Disconnect the Mini PCI card from the attached cables. 

file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA.../Latitude/D400/D400_SERVICE_MANUAL/minipci.htm (1 of 4)6/21/2004 1:56:06 AM

Summary of Contents for d400 - Latitude - Pentium M 1.3 GHz















































































Reviews:

No comments