manualshive.com logo in svg

Dell d400 - Latitude - Pentium M 1.3 GHz, Service Manual, Page: 29 / 78

Share
Download
Dell d400 - Latitude - Pentium M 1.3 GHz Service Manual Download Page 29

Mini PCI Card: 

 

1 securing tabs (2)

2 Mini PCI card connector

NOTICE: 

To avoid damaging the Mini PCI card, never place cables on top of or under the 

card. 

NOTICE: 

The connectors are keyed to ensure correct insertion. If you feel resistance, check 

the connectors and realign the card. 

NOTICE: 

Handle the antenna cables with care because they are very 

fragile. 

NOTE: 

If a Mini PCI card was not already installed, remove the foam that secures the antenna 

cables before you install the card. 

4.  Align the Mini PCI card with the connector at a 45-degree angle, and press the Mini PCI card 

into the connector until you feel a click. 

5.  Connect the antenna cables to the Mini PCI card, with the white cable in the Mini PCI connector 

file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA.../Latitude/D400/D400_SERVICE_MANUAL/minipci.htm (3 of 4)6/21/2004 1:56:06 AM

Summary of Contents for d400 - Latitude - Pentium M 1.3 GHz















































































Reviews:

No comments