Dell D15S, Service Manual

Page: 46 / 91

CAUTION: For maximum cooling of the processor, do not touch the heat transfer areas on the heat sink. The oils
in your skin can reduce the heat transfer capability of the thermal grease.
About this task
The following images indicate the location of the processor and provide a visual representation of the removal procedure.
Steps
1. Press the release lever down and then push it away from the processor to release it from the securing tab.
2. Extend the release lever completely and open the processor cover.
3. Gently lift the processor from the processor socket on the system board.
CAUTION: When removing the processor, do not touch any of the pins inside the socket or allow any objects
to fall on the pins in the socket.
Installing the processor
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
46 Removing and installing components