![Dell D14U Setup And Specifications Manual Download Page 32](http://html.mh-extra.com/html/dell/d14u/d14u_setup-and-specifications-manual_79987032.webp)
Table 28. Performance(continued)
Option
Description
This option is set by default.
Intel TurboBoost
Allows you to enable or disable the Intel TurboBoost mode of the
processor.
•
Enable Intel TurboBoost
This option is set by default.
Hyper-Thread Control
Allows you to enable or disable the HyperThreading in the
processor.
•
Disabled
•
Enabled
—Default
Power management
Table 29. Power Management
Option
Description
AC Recovery
Determines how the system responds when AC power is re-applied after a power loss. You can set
the AC Recovery to:
•
Power Off
•
Power On
•
Last Power State
This option is Power Off by default.
Enable Intel Speed Shift
Technology
Allows you to enable or disable Intel Speed Shift Technology support. The option
Enable Intel
Speed Shift Technology
is set by default.
Auto On Time
Sets time to automatically turn on the computer. Time is kept in standard 12-hour format
(hour:minutes:seconds). Change the startup time by typing the values in the time and AM/PM
fields.
NOTE:
This feature does not work if you turn off your computer using the switch on a
power strip or surge protector or if Auto Power is set to disabled.
Deep Sleep Control
Allows you to define the controls when Deep Sleep is enabled.
•
Disabled
•
Enabled in S5 only
•
Enabled in S4 and S5
This option is Enabled in S4 and S5 by default
USB Wake Support
Allows you to enable the USB devices to wake the computer from standby mode. The option
Enable USB Wake Support
is selected by default.
Wake on LAN/WWAN
This option allows the computer to power up from the off state when triggered by a special LAN
signal. This feature only works when the computer is connected to AC power supply.
•
Disabled
- Does not allows the system to power on by special LAN signals when it receives a
wake-up signal from the LAN or wireless LAN.
•
LAN
or
WLAN
- Allows the system to be powered on by special LAN or wireless LAN signals.
•
LAN Only
- Allows the system to be powered on by special LAN signals.
•
LAN with PXE Boot
- A wakeup packet sent to the system in either the S4 or S5 state, that
will cause the system to wake-up and immediately boot to PXE.
•
WLAN Only
- Allows the system to be powered on by special WLAN signals.
This option is Disabled by default.
32
System setup