Replacing the wireless card
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your computer
. After working inside your computer, follow the instructions in
. For more safety best practices, see the Regulatory Compliance home page at
.
Topics:
•
•
Procedure
1. Connect the antenna cables to the wireless card.
2. Align the screw hole on the wireless-card bracket with the screw hole on the wireless card.
3. Slide the wireless card at an angle into the wireless-card slot.
4. Replace the screw (M2xL3.5) that secures the wireless card to the system board.
Post-requisites
1. Follow the procedure from step 4 to step 8 in “
”.
.
.
19
Replacing the wireless card
33