Dell D14S003, Service Manual

Page: 24 / 56

Removing the memory module
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer . After working inside your computer, follow the instructions in After
working inside your computer . For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance .
Topics:
• Removing the power-button module
• Procedure
Removing the power-button module
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer . After working inside your computer, follow the instructions in After
working inside your computer . For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance .
Prerequisites
1. Remove the computer cover .
2. Remove the front bezel .
3. Follow the procedure from step 1 to step 4 in “ Removing the optical drive ”.
Procedure
1. Remove the screw (#6-32xL6.35) that secures the front I/O bracket to the chassis.
2. Swivel open the front I/O bracket from the chassis.
NOTE: Do not extend the front I/O bracket too far to prevent damage to the antennas.
14
24 Removing the memory module