Installing the display assembly
1
Place the display assembly to align with the screw holders on the computer.
2
Tighten the M1.6xL2 screws to secure the display assembly to the computer.
3
Turn over the computer.
4
Connect the display cable to the connector.
5
Place the metal bracket over the display connector and tighten the screw to secure the display cable to the computer.
6
Replace the power port on the system board and tighten the screw to secure it to the display hinge.
7
Route the WLAN card cable to its routing guide on the fan and then reconnect the antenna cables to the WLAN card.
8
Connect the eDP cable to its connector on the system board.
9
Install the:
a
b
c
10 Follow the procedure in
After working inside your computer
26
Removing and installing components
Summary of Contents for Chromebook 11 3380
Page 44: ...44 Software ...