Dell C9000 series, Reference Manual

Page: 935 / 2286

Related
Commands
interface — configures a physical interface.
interface null — configures a Null interface.
interface port-channel — configures a port channel.
interface vlan — configures a VLAN.
interface ManagementEthernet
Configure the Management port on the system (either the Primary or Standby RPM).
C9000 Series
Syntax
interface ManagementEthernet slot/port
Parameters
slot/port Enter the keyword
ManagementEthernet
, then the slot
number (0 or 1) and port number zero (0).
Defaults Not configured.
Command Modes CONFIGURATION
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.11.1 Introduced on the S55, S60, and S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.5.1.0 Introduced on the C-Series.
6.4.1.0 Introduced
Usage Information You cannot delete a Management port.
The Management port is enabled by default (
no shutdown
). To assign an IP address to
the Management port, use the
ip address
command.
Interfaces 935