Dell C9000 series, Reference Manual

Page: 926 / 2286

Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.4.1.0 Modified for E-Series: Revised from 78 to 240 characters.
Usage Information
Important Points to Remember:
• To use special characters as a part of the description string, you must enclose the
whole string in double quotes.
• Spaces between characters are not preserved after entering this command unless
you enclose the entire description in quotation marks (
“ desc_text ”
).
• Entering a text string after the
description
command overwrites any previous
text string that you previously configured as the description.
• The
shutdown
and
description
commands are the only commands that you
can configure on an interface that is a member of a port-channel.
• Use the
show interfaces description
command to display descriptions
configured for each interface.
Related
Commands show interfaces — displays information about an interface.
default interface
Resets a physical interface to its factory-default settings.
C9000 Series
Syntax
default interface interface slot/port-range
Parameters
interface slot/
port-range
Enter one of the following interface types and port information
to specify a single port or a range of ports. To specify a port
range, you can enter a hyphenated range and/or individual port
numbers separated with commas; for example,
default
interface tengigabitethernet 1/0-4,7,9-11
. To enter
any random number of ports, you can enter a comma-separated
Interfaces 926