Dell C9000 series, Reference Manual

Page: 888 / 2286

interface
Configure the primary, secondary, and control-vlan interfaces.
C9000 Series
Syntax
interface {primary interface secondary interface control-vlan
vlan-id }
To return to the default, use the
no interface {primary interface secondary
interface control-vlan vlan-id}
command.
Parameters
primary interface Enter the keyword
primary
to configure the primary interface
then one of the following interfaces and slot/port information:
•
Fast Ethernet interface
: enter the keyword
FastEthernet
then the slot/port information.
•
Port Channel interface
: enter the keyword
port-
channel
then a number. The range is from 1 to 128.
•
10-Gigabit Ethernet interface
: enter the keyword
TenGigabitEthernet
then the slot/port information
•
40-Gigabit Ethernet interface
: enter the keyword
fortyGigE
then the slot/port information
secondary
interface
Enter the keyword
secondary
to configure the secondary
interface then one of the following interfaces and slot/port
information:
•
Fast Ethernet interface
: enter the keyword
FastEthernet
then the slot/port information.
•
Port Channel interface
: enter the keyword
port-
channel
then a number. The range is from 1 to 128.
•
10-Gigabit Ethernet interface
: enter the keyword
TenGigabitEthernet
then the slot/port information
•
40-Gigabit Ethernet interface
: enter the keyword
fortyGigE
then the slot/port information
control-vlan vlan-
id
Enter the keyword
control-vlan
then the VLAN ID. The range
is from 1 to 4094.
Defaults none
Command Modes CONFIGURATION (conf-frrp)
Force10 OS Resilient Ring Protocol (FRRP) 888