Dell C9000 series, Reference Manual

Page: 86 / 2286

Version Description
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage Information Users entering EXEC Privilege mode or any other configured privilege level can access
configuration commands. To protect against unauthorized access, use the
enable
password
command to configure a password for the
enable
command at a specific
privilege level. If no privilege level is specified, the default is privilege level 15 . You can
also use the
enable [ level ]
command from a PE console to enter the privileged
mode.
NOTE: If you are authorized for the EXEC Privilege mode by your role, you do not
need to enter an enable password.
Related
Commands enable password — configures a password for the
enable
command and to access a
privilege level.
enable optic-info-update interval
Enable polling intervals of optical information updates for simple network management protocol (SNMP).
C9000 Series
Syntax
enable optical-info-update interval seconds
To disable optical power information updates, use the
no enable optical-info-
update interval
command.
Parameters
interval seconds Enter the keyword
interval
then the polling interval in
seconds. The range is from 120 to 6000 seconds. The default is
300 seconds (5 minutes).
Defaults Disabled
Command Modes CONFIGURATION
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
Control and Monitoring 86