Dell C9000 series, Reference Manual

Page: 1935 / 2286

ip access-list standard — names (or selects) a standard access list to filter based on the
IP address.
ip access-list extended — names (or selects) an extended access list based on the IP
addresses or protocols.
enable password
Change the password for the
enable
command.
C9000 Series
Syntax
enable password [level level ] [ encryption-type ] password
To delete a password, use the
no enable password [ encryption-type ]
password [level level ]
command.
Parameters
level level (OPTIONAL) Enter the keyword
level
then a number as the
level of access. The range is from 1 to 15.
encryption-type
(OPTIONAL) Enter the number
7
or
0
as the encryption type.
Enter a
7
then a text string as the hidden password. The text
string must be a password that was already encrypted by a Dell
Networking router.
Use this parameter only with a password that you copied from
the
show running-config
file of another Dell Networking
router.
password Enter a text string, up to 32 characters long, as the clear text
password.
Defaults No password is configured. level = 15 .
Command Modes CONFIGURATION
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Neworking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
Security 1935