Dell C9000 series, Reference Manual

Page: 376 / 2286

Related
Commands
match as-path — redistributes routes that match an AS-PATH attribute.
ip as-path access-list — configures an AS-PATH access list.
neighbor filter-list — configures a BGP filter based on the AS-PATH attribute.
show ip community-lists — displays configured IP Community access lists.
set automatic-tag
To automatically compute the tag value of the route, configure a filter.
C9000 Series
Syntax
set automatic-tag
To return to the default, enter
no set automatic-tag
.
Defaults Not configured.
Command Modes ROUTE-MAP
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Related
Commands
set level — specify the OSPF area for route redistribution.
set metric — specify the metric value assigned to redistributed routes.
set metric-type — specify the metric type assigned to redistributed routes.
Access Control Lists (ACL) 376