Dell C9000 series, Reference Manual

Page: 282 / 2286

Version Description
6.5.10 Expanded to include the optional QoS
order
priority for the
ACL entry.
Usage Information Use the
order
option only when you use policy-based QoS on the switch. For more
information, refer to the Quality of Service chapter of the C9000 Series Configuration
Guide .
When you use the
log
option, the CP processor logs detail the packets that match.
Depending on how many packets match the log entry and at what rate, the CP may
become busy as it has to log these packets’ details.
By default, 10 ACL logs are generated if you do not specify the threshold explicitly. The
default frequency at which ACL logs are generated is five minutes. By default, flow-
based monitoring is not enabled.
Use the
monitor
option only when you are using flow-based monitoring. For more
information, refer to the Port Monitoring chapter of the C9000 Series Configuration
Guide .
Related
Commands
deny — Assigns a IP ACL filter to deny IP packets.
ip access-list standard — creates a standard ACL.
resequence access-list
Re-assign sequence numbers to entries in an existing ACL.
C9000 Series
Syntax resequence access-list {ipv4 | ipv6 | mac} { access-list-name StartingSeqNum Step-to-
Increment }
Parameters
ipv4 | ipv6 | mac Enter the keyword
ipv4
,
ipv6
or
mac
to identify the access-list
type to resequence.
access-list-name Enter the name of a configured ACL.
StartingSeqNum Enter the starting sequence number to resequence. For IPv4 and
IPv6 ACLs, the range is 0 to 4294967290; for MAC ACLs, the
range is 0 to 65535.
Step-to-
Increment Enter the step to increment the sequence number. For IPv4 and
IPv6 ACLs, the range is 0 to 4294967290; for MAC ACLs, the
range is 0 to 65535.
Access Control Lists (ACL) 282