Dell C9000 series, Reference Manual

Page: 2174 / 2286

Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.11.1 Introduced on the Z9000.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Usage Information The
number
parameter in the
ntp trusted-key
command must be the same number
as the
number
parameter in the
ntp authentication-key
command. If you change
the
ntp authentication-key
command, you must also change the
ntp trusted-
key
command.
Related
Commands
ntp authentication-key — sets an authentication key for NTP.
ntp authenticate — enables the NTP authentication parameters you set.
show clock
Display the current clock settings.
C9000 Series
Syntax
show clock [detail]
From a PE console , use
show clock
.
Parameters
detail (OPTIONAL) Enter the keyword
detail
to view the source
information of the clock.
Command Modes
• EXEC
• EXEC Privilege
System Time and Date 2174