Dell C9000 series, Reference Manual

Page: 2165 / 2286

ntp authenticate
Enable authentication of NTP traffic between the switch and the NTP time serving hosts.
C9000 Series
Syntax
ntp authenticate
To disable NTP authentication, use the
no ntp authentication
command.
Defaults Not enabled.
Command Modes CONFIGURATION
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Usage Information You also must configure an authentication key for NTP traffic using the
ntp
authentication-key
command.
Related
Commands
ntp authentication-key — configures the authentication key for NTP traffic.
ntp trusted-key — configures a key to authenticate.
System Time and Date 2165