Dell C9000 series, Reference Manual

Page: 2138 / 2286

activity
Move to the SupportAssist Activity mode for an activity. Allow the user to configure customized details for a
specific activity.
Syntax
activity { activity-name }
To remove all customized detail for a specific activity, use the
no activity
{ activity-name }
command.
Parameters
activity-name
Enter one of the following keywords:
• Enter the keywords
full-transfer
to specify transfer of
configuration, inventory, logs, and other information.
Command Modes SUPPORTASSIST
Command History This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100
series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON,
S5000, S6000, S6000–ON, Z9500, MXL.
Usage Information By default, each activity follows a set of default actions using a default schedule. Using
this command, you can customize the set of actions and disable a certain activity.
contact-company
Configure the contact information for the company.
Syntax
contact-company name { company-name }[ company-next-name ] ...
[ company-next-name ]
To remove the contact company information, use the
no contact-company
command.
Parameters
company-name Enter the name for the company. If there are multiple words in
the name, use optional additional fields.
SupportAssist 2138