Dell C9000 series, Reference Manual

Page: 2132 / 2286

Parameters
packets_per_seco
nd
in
Enter the packets per second of broadcast traffic allowed into
the network. The range is from 0 to 33554368.
Defaults none
Command Modes CONFIGURATION
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.4.1.0 E-Series Only: Added the
percentage decimal value
option.
6.5.1.0 Introduced on the E-Series.
Usage Information Unknown Unicast Storm-Control is valid for Layer 2 and Layer 2/Layer 3 interfaces.
storm-control unknown-unicast
(Interface)
Configure percentage of unknown-unicast traffic allowed on an interface (ingress only).
C9000 Series
Syntax
storm-control unknown-unicast [ percentage decimal_value in] |
[wred-profile name]] [ packets_per_second in]
To disable unknown-unicast storm control on the interface, use the
no storm-
control unknown-unicast [ percentage decimal_value in] | [wred-
profile name]] [ packets_per_second in]
command.
Storm Control 2132