Dell C9000 series, Reference Manual

Page: 2030 / 2286

Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.7(0.0) Introduced on the S6000-ON.
9.7(0.0) Introduced on the S-Series, Z-Series, and MXL switch.
Usage Information When you enable ingress sFlow on an interface, flow sampling is done on any incoming
traffic.
NOTE: After a physical port is a member of a LAG, it inherits the sFlow
configuration from the LAG port.
Related
Commands sflow enable (Global) — turns sFlow globally.
sflow extended-switch enable
Enable packing information on a switch only.
C9000 Series
Syntax
sflow extended-switch enable
To disable packing information, use the
no sflow extended-switch [enable]
command.
Parameters
enable Enter the keyword
enable
to enable global extended
information.
Defaults Disabled.
Command Modes
CONFIGURATION
CONFIGURATION TERMINAL BATCH
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
sFlow 2030