Dell C9000 series, Reference Manual

Page: 1813 / 2286

Version Description
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.1 Introduced on the E-Series.
Usage Information An aggregate output QoS policy applies to all outbound port traffic. An aggregate
output QoS policy can coexist with per-queue output QoS policies.
Related
Commands
policy-map-input — creates an input policy map.
policy-map-output — creates an output policy map.
policy-map-input
Create an input policy map.
C9000 Series
Syntax
policy-map-input policy-map-name [layer2] [cpu-qos]
To remove an input policy map, use the
no policy-map-input policy-map-name
[layer2] [cpu-qos]
command.
Parameters
policy-map-name Enter the name of the policy map in character format (32
characters maximum).
layer2 (OPTIONAL) Enter the keyword
layer2
to specify a Layer 2
Class Map. The default is Layer 3 .
cpu-qos (OPTIONAL) Enter the keyword
cpu-qos
to create an input
policy to be used to rate-limit control-plane traffic (CoPP).
Defaults Layer 3
Command Modes
CONFIGURATION
CONFIGURATION TERMINAL BATCH
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Quality of Service (QoS) 1813