Dell C9000 series, Reference Manual

Page: 1710 / 2286

Version Description
9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.
Usage Information The
show cam pbr
command displays the PBR CAM content.
Related
Commands
• ip redirect-group – applies a redirect group to an interface.
• show ip redirect-list – displays the redirect-list configuration.
show ip redirect-list
View the redirect list configuration and the interfaces it is applied to.
C9000 Series
Syntax
show ip redirect-list redirect-list-name
Parameters
redirect-list-name Enter the name of a configured Redirect list.
Command Modes
• EXEC
• EXEC Privilege
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.8(0.0) Introduced on the S3048-ON and S4048–ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.
Example
Dell#sh ip redirect-list
IP redirect-list test1:
Defined as:
seq 5 redirect tunnel 1 track 1 ip any any, Track 1 [up], Next-
hop reachable (via Te 0/7)
Applied interfaces:
Policy-based Routing (PBR) 1710