Dell C9000 series, Reference Manual

Page: 1587 / 2286

Version Description
8.3.19.0 Introduced on the S4820T.
Usage Information By default, the dead interval is four times longer than the default hello-interval.
Related
Commands
ipv6 ospf hello-interval – specifies the time interval between hello packets.
ipv6 ospf encryption
Configure an IPsec encryption policy for OSPFv3 packets on an IPv6 interface.
C9000 Series
Syntax
ipv6 ospf encryption {null | ipsec spi number esp encryption-
algorithm [ key-encryption-type ] key athentication-algorithm [ key-
encryption-type ] key }}
Parameters
null Causes an encryption policy configured for the area to not be
inherited on the interface.
ipsec spi number Security Policy index (SPI) value that identifies an IPsec security
policy. The range is from 256 to 4294967295.
esp encryption-
algorithm
Encryption algorithm used with ESP.
Valid values are: 3DES, DES, AES-CBC, and NULL.
For AES-CBC, only the AES-128 and AES-192 ciphers are
supported.
key-encryption-
type
(OPTIONAL) Specifies if the key is encrypted.
Valid values: 0 (key is not encrypted) or 7 (key is encrypted).
key
Text string used in authentication.
The required lengths of a non-encrypted or encrypted key are:
3DES - 48 or 96 hex digits; DES - 16 or 32 hex digits; AES-CBC
-32 or 64 hex digits for AES-128 and 48 or 96 hex digits for
AES-192.
authentication-
algorithm Specifies the authentication algorithm to use for encryption.
Valid values are
MD5
or
SHA1
.
Open Shortest Path First (OSPFv2 and OSPFv3) 1587