26
Removing and Replacing Parts
w
w
w
.d
e
ll
.co
m
|
s
u
p
p
o
rt
.d
e
ll.c
o
m
NOTICE:
Position the keyboard flex cable so it is not pinched when you
replace the keyboard in the bottom case assembly.
4
Check that the keyboard is correctly installed. The keys should be flush
with the left and right surfaces of the palmrest.
5
Reinstall the five M2.5 x 12-mm screws in the holes labeled "circle K."
Removing the Display Assembly
NOTICE:
You must remove the display assembly before you remove the
palmrest assembly; the display assembly hinges pass through the back of the
palmrest assembly.
NOTE:
Always remove and replace the display panel as a complete assembly.
NOTICE:
Disconnect the computer and any attached devices from electrical
outlets, and remove any installed batteries.
NOTICE:
To avoid ESD, ground yourself by using a wrist grounding strap or
by touching an unpainted metal surface on the computer.
NOTICE:
Read "Preparing to Work Inside the Computer" before performing
the following procedure.
Summary of Contents for C600 - Latitude Intel P-4 1.4GHz
