manualshive.com logo in svg

Dell C2422HE, User Manual

Share
Download
Dell C2422HE User Manual Download Page 82

82

        |       Operating the monitor

OSD warning messages

When the monitor does not support a particular resolution mode, you can see the 
following message:

The current input timing is not supported by the monitor display.

Please change your input timing to 1920x1080/2560x1440/3440x1440, 60Hz 

or any other monitor listed timing as per monitor specifications.

This means that the monitor cannot synchronize with the signal that it is receiving 
from the computer. See 

Monitor Specifications

 for the Horizontal and Vertical 

frequency ranges addressable by this monitor. Recommended mode is 

1920 x 1080 

(C2422HE) / 2560 x 1440 (C2722DE) / 3440 x 1440 (C3422WE)

.

You can see the following message before the DDC/CI function is disabled:

The function of adjusting display setting using PC application will be 

disabled.

Do you wish to disable DDC/CI function?

Yes

No

When the monitor enters the 

Standby

 mode, the following message will appear:

Going into Standby mode...

Activate the computer and wake up the monitor to gain access to the 

OSD

.

Summary of Contents for C2422HE



















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands